China Wholesale HSS Twisted Drill Bits Manufacturers - HSS Drill – MeiWha

Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers.

The HSS Twist Drill Bit Ground is manufactured to DIN 1897. The drill bit is Type N (flute angle) with a 118-degree tip and a diameter tolerance of h8.

Precautions for using cemented carbide tools

1) Cemented carbide is a hard and brittle material, which is brittle and damaged under excessive force or some specific local stress effects, and has sharp cutting edges.

2) Most of the cemented carbides are mainly tungsten and cobalt. The ingredients have a high density, so they should be handled as heavy objects during transportation and storage.

3) Cemented carbide and steel have different thermal expansion coefficients. In order to prevent stress concentration from cracking, attention should be paid to welding at an appropriate temperature.

4) Carbide cutting tools should be stored in a dry, away from corrosive atmosphere.

5) During the cutting process of cemented carbide tools, chips, chips, etc. cannot be prevented. Please prepare necessary labor protection supplies before machining.

6) If cooling fluid or dust collection equipment is used in the cutting process, in consideration of the service life of the machine tool and cutting tools, please use cutting fluid or dust collection equipment correctly.

7) Please stop using the tool with cracks during processing.

8) Carbide cutting tools will become dull and lose strength due to long-term use. Please don’t let non-professionals sharpen them.

9) Please keep the worn out alloy tools and the fragments of alloy tools properly to prevent damage to others.