China Wholesale MW-16 Tapping Machine with high performance Factories - Spiral Flute Tap – MeiWha

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With our rich working experience and thoughtful companies, we have now been recognized as being a trustworthy supplier for a lot of global potential buyers for For Stainless Steel & Titanium Alloy, Meiwha Tapping Machine, Bt-SDC Back Pull Handle, In addition, we would properly tutorial the purchasers about the application techniques to adopt our items plus the way to select appropriate materials.
China Wholesale MW-16 Tapping Machine with high performance Factories - Spiral Flute Tap – MeiWha Detail:

Following are recommendations for the degree of spiral for various materials:

Spiral flute taps are more suitable for processing non-through hole threads (also called blind holes), and the chips are upward during processing discharge. Due to the helix angle, the actual cutting rake angle of the tap will increase as the helix angle increases.

• High spiral flutes 45° and higher – effective for very ductile materials like aluminum and copper. If used in other materials, they will usually cause the chips to nest because the spiral is too • fast and the chip area is too small for the chip to form correctly.
• Spiral flutes 38° – 42° – recommended for medium to high carbon steel or free machining stainless steel. They form a chip tight enough to easily evacuate. On larger taps, it allows for pitch relief to ease the cutting.
• Spiral flutes 25° – 35° – recommended for free machining, low or leaded steels, free machining bronze, or brasses. Spiral flute taps used in brass and tough bronzes normally do not perform well because the small broken chip will not flow up the spiral flute well.
• Spiral flutes 5° – 20° – For tougher materials such as some stainless, titanium or high nickel alloys, a slower spiral is recommended. This allows the chips to be slightly pulled upward but does not weaken the cutting edge as much as higher spirals will.
• Reverse cut spirals, such as RH cut/LH spiral, will push the chips forward and are usually 15° spiral. These work especially well in tubing applications.

1617346082(1)

001

003

 

Specification

 

 


Product detail pictures:

China Wholesale MW-16 Tapping Machine with high performance Factories - Spiral Flute Tap – MeiWha detail pictures

China Wholesale MW-16 Tapping Machine with high performance Factories - Spiral Flute Tap – MeiWha detail pictures


Related Product Guide:

Our company since its inception, constantly regards product or service high quality as business life, continually improve creation technology, make improvements to product high-quality and consistently strengthen business total high-quality management, in strict accordance together with the national standard ISO 9001:2000 for China Wholesale MW-16 Tapping Machine with high performance Factories - Spiral Flute Tap – MeiWha , The product will supply to all over the world, such as: Mauritius, Swedish, Hanover, Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We've got tightened inspection for quality of product.
  • Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
    5 Stars By Honorio from America - 2017.11.01 17:04
    High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
    5 Stars By Nana from Cannes - 2017.04.18 16:45
    Write your message here and send it to us