China Wholesale MW-16 Tapping Machine with high performance Suppliers - Spiral Flute Tap – MeiWha

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We usually keep on with the principle "Quality To start with, Prestige Supreme". We've been fully committed to offering our purchasers with competitively priced excellent solutions, prompt delivery and skilled support for Mill Sharpener, Bt-C Powerful Holder, Bt-SK High Speed Holder, We warmly welcome friends from all walks of existence to cooperate with us.
China Wholesale MW-16 Tapping Machine with high performance Suppliers - Spiral Flute Tap – MeiWha Detail:

Following are recommendations for the degree of spiral for various materials:

Spiral flute taps are more suitable for processing non-through hole threads (also called blind holes), and the chips are upward during processing discharge. Due to the helix angle, the actual cutting rake angle of the tap will increase as the helix angle increases.

• High spiral flutes 45° and higher – effective for very ductile materials like aluminum and copper. If used in other materials, they will usually cause the chips to nest because the spiral is too • fast and the chip area is too small for the chip to form correctly.
• Spiral flutes 38° – 42° – recommended for medium to high carbon steel or free machining stainless steel. They form a chip tight enough to easily evacuate. On larger taps, it allows for pitch relief to ease the cutting.
• Spiral flutes 25° – 35° – recommended for free machining, low or leaded steels, free machining bronze, or brasses. Spiral flute taps used in brass and tough bronzes normally do not perform well because the small broken chip will not flow up the spiral flute well.
• Spiral flutes 5° – 20° – For tougher materials such as some stainless, titanium or high nickel alloys, a slower spiral is recommended. This allows the chips to be slightly pulled upward but does not weaken the cutting edge as much as higher spirals will.
• Reverse cut spirals, such as RH cut/LH spiral, will push the chips forward and are usually 15° spiral. These work especially well in tubing applications.

1617346082(1)

001

003

 

Specification

 

 


Product detail pictures:

China Wholesale MW-16 Tapping Machine with high performance Suppliers - Spiral Flute Tap – MeiWha detail pictures

China Wholesale MW-16 Tapping Machine with high performance Suppliers - Spiral Flute Tap – MeiWha detail pictures


Related Product Guide:

Our growth depends to the superior products ,great talents and repeatedly strengthened technology forces for China Wholesale MW-16 Tapping Machine with high performance Suppliers - Spiral Flute Tap – MeiWha , The product will supply to all over the world, such as: Chicago, Puerto Rico, Algeria, Our company abides by the management idea of "keep innovation, pursue excellence". On the basis of assuring the advantages of existing products, we continuously strengthen and extend product development. Our company insists on innovation to promote the sustainable development of enterprise, and make us become the domestic high-quality suppliers.
  • The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
    5 Stars By Hilda from Myanmar - 2017.11.12 12:31
    In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
    5 Stars By Vanessa from El Salvador - 2018.09.08 17:09
    Write your message here and send it to us