China Wholesale Servo Tapping Machine Manufacturers - Spiral Flute Tap – MeiWha

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Using a full scientific good quality administration system, very good quality and superior faith, we win good standing and occupied this discipline for Bt-C Powerful Holder, PCD Insert, High Power Hydraulic Vise, We sincerely look forward to hearing from you. Give us a opportunity to show you our professionalism and enthusiasm. We have been sincerely welcome excellent friends from numerous circles at dwelling and overseas occur to cooperate!
China Wholesale Servo Tapping Machine Manufacturers - Spiral Flute Tap – MeiWha Detail:

Following are recommendations for the degree of spiral for various materials:

Spiral flute taps are more suitable for processing non-through hole threads (also called blind holes), and the chips are upward during processing discharge. Due to the helix angle, the actual cutting rake angle of the tap will increase as the helix angle increases.

• High spiral flutes 45° and higher – effective for very ductile materials like aluminum and copper. If used in other materials, they will usually cause the chips to nest because the spiral is too • fast and the chip area is too small for the chip to form correctly.
• Spiral flutes 38° – 42° – recommended for medium to high carbon steel or free machining stainless steel. They form a chip tight enough to easily evacuate. On larger taps, it allows for pitch relief to ease the cutting.
• Spiral flutes 25° – 35° – recommended for free machining, low or leaded steels, free machining bronze, or brasses. Spiral flute taps used in brass and tough bronzes normally do not perform well because the small broken chip will not flow up the spiral flute well.
• Spiral flutes 5° – 20° – For tougher materials such as some stainless, titanium or high nickel alloys, a slower spiral is recommended. This allows the chips to be slightly pulled upward but does not weaken the cutting edge as much as higher spirals will.
• Reverse cut spirals, such as RH cut/LH spiral, will push the chips forward and are usually 15° spiral. These work especially well in tubing applications.

1617346082(1)

001

003

 

Specification

 

 


Product detail pictures:

China Wholesale Servo Tapping Machine Manufacturers - Spiral Flute Tap – MeiWha detail pictures

China Wholesale Servo Tapping Machine Manufacturers - Spiral Flute Tap – MeiWha detail pictures


Related Product Guide:

We have now probably the most innovative production equipment, experienced and qualified engineers and workers, regarded high quality control systems and also a friendly expert income team pre/after-sales support for China Wholesale Servo Tapping Machine Manufacturers - Spiral Flute Tap – MeiWha , The product will supply to all over the world, such as: Vietnam, Thailand, Panama, In order to meet our market demands, we have paied more attention to the quality of our products and services. Now we can meet customers' special requirements for special designs. We persistently develop our enterprise spirit "quality lives the enterprise, credit assures cooperation and keep the motto in our minds: customers first.
  • Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!
    5 Stars By Irene from Istanbul - 2017.04.08 14:55
    This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
    5 Stars By Sara from Kyrgyzstan - 2017.08.16 13:39
    Write your message here and send it to us