Featured

  • China Wholesale Spiral Flute Taps Factory - Spiral Flute Tap – MeiWha

    China Wholesale Spiral Flute Taps Factory - Spiral Flute Tap – MeiWha

    Following are recommendations for the degree of spiral for various materials: Spiral flute taps are more suitable for processing non-through hole threads (also called blind holes), and the chips are upward during processing discharge. Due to the helix angle, the actual cutting rake angle of the tap will increase as the helix angle increases. • High spiral flutes 45° and higher – effective for very ductile materials like aluminum and copper. If used in other materials, they will usually cause...
  • China Wholesale HSS Twist Drills Factories - HSS Drill – MeiWha

    China Wholesale HSS Twist Drills Factories - HSS Drill – MeiWha

    Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo...
  • China Wholesale CNC Milling Inserts Factories - For Heat-Resistant Alloy – MeiWha

    China Wholesale CNC Milling Inserts Factories - For Heat-Resistant Alloy – MeiWha

    As a full-line supplier of metalworking tools, MeiWha provides a full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts are used for axial and face turning and feature three 80° corner cutting edges on each side of the insert. They replace the rhombic inserts that had only two cutting edges, thus saving production time and cost while maximizing insert life. MeiWha offers a variety of unique chipform...
  • China Wholesale Tool Holders Suppliers - HSK(A)-GC High-speed powerful Holder – MeiWha

    China Wholesale Tool Holders Suppliers - HSK(A)-GC High-speed powerful Holder – MeiWha

    There are three types of Meihua CNC BT tool holder: BT30 tool holder, BT40 tool holder, BT50 tool holder. The material: using titanium alloy 20CrMnTi, wear-resistant and durable. The hardness of the handle is 58-60 degrees, the accuracy is 0.002mm to 0.005mm, the clamping is tight, and the stability is high. Features: Good rigidity, high hardness, carbonitriding treatment, wear resistance and durability. High precision, good dynamic balance performance and strong stability. The BT tool holder...
  • China Wholesale CBN Insert Manufacturers - For Aluminium &  Copper – MeiWha

    China Wholesale CBN Insert Manufacturers - For Aluminium & Copper – MeiWha

    ISO standard tools perform most of the metalworking industry’s machining. The applications range from finishing to roughing. As a full-line supplier of metalworking tools, MeiWha provides a full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts are used for axial and face turning and feature three 80° corner cutting edges on each side of the insert. They replace the rhombic inserts that had on...
  • China Wholesale For Stainless Steel & Titanium Alloy Factories - Complex Chamfer – MeiWha

    China Wholesale For Stainless Steel & Titanium Alloy Factories - Complex Chamfer – MeiWha

      Chamfering is a difficult task in small areas. A complex chamfer is one of the most useful and high efficiency producing machine. One can use a complex chamfering machine for smoothening of edges at a precise angle. This type of chamfering machine can be opted for materials like marble, glass, and other similar materials. Also, this is user-friendly and provides grip to the user for handling the machinery. There are major benefits that can be obtained from using the Chamfering machine is th...
  • China Wholesale Fast Feed Inserts Suppliers - For Steel & Iron Casting – MeiWha

    China Wholesale Fast Feed Inserts Suppliers - For Steel & Iron Casting – MeiWha

    Video As a full-line supplier of metalworking tools, MeiWha provides a full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts are used for axial and face turning and feature three 80° corner cutting edges on each side of the insert. They replace the rhombic inserts that had only two cutting edges, thus saving production time and cost while maximizing insert life. MeiWha offers a variety of unique ch...
  • China Wholesale Nail Drill Factories - Alloy Drill – MeiWha

    China Wholesale Nail Drill Factories - Alloy Drill – MeiWha

    Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. These bits require rigid toolholding to prevent breakage and should not be u...
  • China Wholesale 4mm Ball Nose End Mill Suppliers - Ball End Milling HSS ROUGHING END MILLS 6MM – 20MM – MeiWha

    China Wholesale 4mm Ball Nose End Mill Suppliers - Ball End Milling HSS ROUGHING END MILLS 6MM – 20MM – MeiWha

    They are available in a wide variety of diameter sizes from 1mm to 20mm. Meihua milling cutter 55 degrees: MW7050 series, coating color: fuchsia, Balzers coating, Jinlu GU25UF Bar stock, mold steel, stainless steel, general series of materials below 55 degrees, SKD11 corresponds to Chinese grades: Cr12MoV, 718 (41~47HRC hardness), NAK80 (HRC37~43), S316, Cr12MoV, C45, P20, ordinary mold steel, gray Cast iron, etc. Meihua milling cutter 65 degrees: MW7060 high hardness series, coating color: b...
  • China Wholesale HSS Spiral Taps Factories - Spiral Flute Tap – MeiWha

    China Wholesale HSS Spiral Taps Factories - Spiral Flute Tap – MeiWha

    Following are recommendations for the degree of spiral for various materials: Spiral flute taps are more suitable for processing non-through hole threads (also called blind holes), and the chips are upward during processing discharge. Due to the helix angle, the actual cutting rake angle of the tap will increase as the helix angle increases. • High spiral flutes 45° and higher – effective for very ductile materials like aluminum and copper. If used in other materials, they will usually cause...
  • China Wholesale 3mm Alloy Drill Bit Manufacturers - Alloy Drill – MeiWha

    China Wholesale 3mm Alloy Drill Bit Manufacturers - Alloy Drill – MeiWha

    Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. These bits require rigid toolholding to prevent breakage and should not be u...
  • China Wholesale HSS Industrial Drill Bits For Sale Suppliers - HSS Drill – MeiWha

    China Wholesale HSS Industrial Drill Bits For Sale Suppliers - HSS Drill – MeiWha

    Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo...