Featured
-
China Wholesale Precision Cross Slide Vise Suppliers - Tapping Sharpener – MeiWha
This machine can be used for grinding all kinds of high speed steel and carbide engraving tools with shape like semicircle or reverse taper angel and single side or variable cutting tools.Grinding indexing head can be operated in 24 positions for grinding at any angle and shape.it can be used for grinding end mills,engravers,drills,lathe cutters and ball cutters without any complicated steps by simply replacing the indexing head accessories. -
China Wholesale 4 Flute Solid Carbide Roughing End Mills Factories - Ball Nose Milling HSS Round Nose Milling 6mm – 20mm – MeiWha
They can be single end or double end and they can be made from solid carbide or various compositions of high speed steel. They can be general purpose or high perfomance geometries. They can be used used for milling a large corner radius, grooving with a full radius, and contour or profile milling. The smaller diameters can be used for engraving. They are available in a wide variety of standard sizes and lengths. Carbide ball end mills are used for cutting curves and 3D shapes into metals,... -
China Wholesale Hydraulic Vise Jaws Manufacturers - Tapping Machine – MeiWha
Meiwha Electric Tapping Machine, adopt the best advanced electric servo intelligent system. Used for steel, aluminum, wood plastic and other tapping. imported motor ,cast iron body, double cantilever ,double pneumatic spring, table support, automatic return, cast iron body is not easy to deformation intelligent servo system, man-machine interface, powerful function, manual, automatic, vibration tapping mode to meet a variety of processing needs, with torque overload protection chuck, protect... -
China Wholesale Hot Tapping Machine Factory - Spiral Point Tap – MeiWha
The degree is better and can withstand greater cutting force. The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the apex taps should be preferentially used for through-hole threads. Spiral point tap, also known as “gun taps” because they “shoot” chips forward (clever, huh?), are very effective at clearing chips ahead of the cutting edge of the tap and pushing them out the other end of the hole. This is especially effect... -
China Wholesale For Heat-Resistant Alloy Factories - Slide Chamfering – MeiWha
One can use a complex chamfering machine for smoothening of edges at a precise angle. This type of chamfering machine can be opted for materials like marble, glass, and other similar materials. Also, this is user-friendly and provides grip to the user for handling the machinery. There are major benefits that can be obtained from using the Chamfering machine is that labouring is not required when one can use the Chamfering machine instead of hard work. The cycle of the chamfering machine works... -
China Wholesale BT-ER Holder Factory - BT-APU Integrated Drill Chuck – MeiWha
There are three types of Meihua CNC BT tool holder: BT30 tool holder, BT40 tool holder, BT50 tool holder. The material: using titanium alloy 20CrMnTi, wear-resistant and durable. The hardness of the handle is 58-60 degrees, the accuracy is 0.002mm to 0.005mm, the clamping is tight, and the stability is high. Features: Good rigidity, high hardness, carbonitriding treatment, wear resistance and durability. High precision, good dynamic balance performance and strong stability. The BT tool holder... -
China Wholesale Complex Chamfer Factory - High Power Hydraulic Vise – MeiWha
High pressure MeiWha vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centres (vertical and horizontal). – Accuracy of 0.01 mm in clamping repeatability. – Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness. – Ideal for working in horizontal and vertical machining centres. – Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm. – Possible working positions:... -
China Wholesale End Milling For Aluminum Suppliers - Flat End Milling HSS Flat End Mills 6mm – 20mm – MeiWha
Center cutting end mills can be used for plunging operations (axial milling), and can also be used in side milling operations (radial milling). Non-center cutting end mills may only be used in side milling applications. The most common material used for end mills is tungsten carbide, but HSS (high speed steel) and Cobalt (high speed steel with cobalt as an alloy) are also available. Flat end mills are used for roughing operations, cutting 2D shapes like engravings and circuit boards, and fla... -
China Wholesale HSS Straight Flute Thread Taps Suppliers - Spiral Point Tap – MeiWha
The degree is better and can withstand greater cutting force. The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the apex taps should be preferentially used for through-hole threads. Spiral point tap, also known as “gun taps” because they “shoot” chips forward (clever, huh?), are very effective at clearing chips ahead of the cutting edge of the tap and pushing them out the other end of the hole. This is especially effect... -
China Wholesale Drill Grinding Machine Factories - HSS Drill – MeiWha
Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo... -
China Wholesale 1604 R8 Inserts Suppliers - For Heat-Resistant Alloy – MeiWha
As a full-line supplier of metalworking tools, MeiWha provides a full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts are used for axial and face turning and feature three 80° corner cutting edges on each side of the insert. They replace the rhombic inserts that had only two cutting edges, thus saving production time and cost while maximizing insert life. MeiWha offers a variety of unique chipform... -
China Wholesale Mill Cutter Grinding Machine Manufacturers - Ball Nose Milling HSS Round Nose Milling 6mm – 20mm – MeiWha
They can be single end or double end and they can be made from solid carbide or various compositions of high speed steel. They can be general purpose or high perfomance geometries. They can be used used for milling a large corner radius, grooving with a full radius, and contour or profile milling. The smaller diameters can be used for engraving. They are available in a wide variety of standard sizes and lengths. Carbide ball end mills are used for cutting curves and 3D shapes into metals,...
