Featured
-
China Wholesale 3mm Alloy Drill Bit Manufacturers - HSS Drill – MeiWha
Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo... -
China Wholesale High Precision Tool Vise Manufacturers - Tapping Machine – MeiWha
Meiwha Electric Tapping Machine, adopt the best advanced electric servo intelligent system. Used for steel, aluminum, wood plastic and other tapping. imported motor ,cast iron body, double cantilever ,double pneumatic spring, table support, automatic return, cast iron body is not easy to deformation intelligent servo system, man-machine interface, powerful function, manual, automatic, vibration tapping mode to meet a variety of processing needs, with torque overload protection chuck, protect... -
China Wholesale Tap Sharpener Machine Factory - Spiral Flute Tap – MeiWha
Following are recommendations for the degree of spiral for various materials: Spiral flute taps are more suitable for processing non-through hole threads (also called blind holes), and the chips are upward during processing discharge. Due to the helix angle, the actual cutting rake angle of the tap will increase as the helix angle increases. • High spiral flutes 45° and higher – effective for very ductile materials like aluminum and copper. If used in other materials, they will usually cause... -
China Wholesale CNC Tap Sharpener Manufacturers - Straight Flute Tap – MeiWha
Straight Flute Taps are used to cut threads in blind or through holes in most materials. They are manufactured to ISO529 standard and are suitable for hand or machine cutting. This versatile set contains three taps: - Taper Cut (First tap) – Used for through holes or as a starter tap. - Second Tap (Plug) – To follow the taper when tapping blind holes. - Bottom Tap (Bottom) – For threading to the bottom of a blind hole. All taps should be used with the corresponding drill siz... -
China Wholesale Angle Solid Vise Factories - Complex Chamfer – MeiWha
Chamfering is a difficult task in small areas. A complex chamfer is one of the most useful and high efficiency producing machine. One can use a complex chamfering machine for smoothening of edges at a precise angle. This type of chamfering machine can be opted for materials like marble, glass, and other similar materials. Also, this is user-friendly and provides grip to the user for handling the machinery. There are major benefits that can be obtained from using the Chamfering machine is th... -
China Wholesale Drill Bits Manufacturers - HSS Drill – MeiWha
Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo... -
China Wholesale CNC Tap Sharpener Factory - Straight Flute Tap – MeiWha
Straight Flute Taps are used to cut threads in blind or through holes in most materials. They are manufactured to ISO529 standard and are suitable for hand or machine cutting. This versatile set contains three taps: - Taper Cut (First tap) – Used for through holes or as a starter tap. - Second Tap (Plug) – To follow the taper when tapping blind holes. - Bottom Tap (Bottom) – For threading to the bottom of a blind hole. All taps should be used with the corresponding drill siz... -
China Wholesale Servo Tapping Machine Factory - Spiral Point Tap – MeiWha
The degree is better and can withstand greater cutting force. The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the apex taps should be preferentially used for through-hole threads. Spiral point tap, also known as “gun taps” because they “shoot” chips forward (clever, huh?), are very effective at clearing chips ahead of the cutting edge of the tap and pushing them out the other end of the hole. This is especially effect... -
China Wholesale Tap Grinder Machine Factory - Straight Flute Tap – MeiWha
Straight Flute Taps are used to cut threads in blind or through holes in most materials. They are manufactured to ISO529 standard and are suitable for hand or machine cutting. This versatile set contains three taps: - Taper Cut (First tap) – Used for through holes or as a starter tap. - Second Tap (Plug) – To follow the taper when tapping blind holes. - Bottom Tap (Bottom) – For threading to the bottom of a blind hole. All taps should be used with the corresponding drill siz... -
China Wholesale High Performance CNC Tool Holder Factory - HSK(A)-GC High-speed powerful Holder – MeiWha
There are three types of Meihua CNC BT tool holder: BT30 tool holder, BT40 tool holder, BT50 tool holder. The material: using titanium alloy 20CrMnTi, wear-resistant and durable. The hardness of the handle is 58-60 degrees, the accuracy is 0.002mm to 0.005mm, the clamping is tight, and the stability is high. Features: Good rigidity, high hardness, carbonitriding treatment, wear resistance and durability. High precision, good dynamic balance performance and strong stability. The BT tool holder... -
China Wholesale PCD Insert Suppliers - For Aluminium & Copper – MeiWha
ISO standard tools perform most of the metalworking industry’s machining. The applications range from finishing to roughing. As a full-line supplier of metalworking tools, MeiWha provides a full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts are used for axial and face turning and feature three 80° corner cutting edges on each side of the insert. They replace the rhombic inserts that had on... -
China Wholesale Grinding Wheel Chamfer Machine Factory - Tapping Sharpener – MeiWha
This machine can be used for grinding all kinds of high speed steel and carbide engraving tools with shape like semicircle or reverse taper angel and single side or variable cutting tools.Grinding indexing head can be operated in 24 positions for grinding at any angle and shape.it can be used for grinding end mills,engravers,drills,lathe cutters and ball cutters without any complicated steps by simply replacing the indexing head accessories.
