Featured
-
China Wholesale Electric End Mill Sharpener Factories - Ball Nose Milling HSS Round Nose Milling 6mm – 20mm – MeiWha
They can be single end or double end and they can be made from solid carbide or various compositions of high speed steel. They can be general purpose or high perfomance geometries. They can be used used for milling a large corner radius, grooving with a full radius, and contour or profile milling. The smaller diameters can be used for engraving. They are available in a wide variety of standard sizes and lengths. Carbide ball end mills are used for cutting curves and 3D shapes into metals,... -
China Wholesale 2mm Drill Suppliers - HSS Drill – MeiWha
Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo... -
China Wholesale Tungsten Steel Round Nose Milling Cutter Suppliers - Ball End Milling HSS ROUGHING END MILLS 6MM – 20MM – MeiWha
They are available in a wide variety of diameter sizes from 1mm to 20mm. Meihua milling cutter 55 degrees: MW7050 series, coating color: fuchsia, Balzers coating, Jinlu GU25UF Bar stock, mold steel, stainless steel, general series of materials below 55 degrees, SKD11 corresponds to Chinese grades: Cr12MoV, 718 (41~47HRC hardness), NAK80 (HRC37~43), S316, Cr12MoV, C45, P20, ordinary mold steel, gray Cast iron, etc. Meihua milling cutter 65 degrees: MW7060 high hardness series, coating color: b... -
China Wholesale CNC Machine Tool holder Bt Shank Manufacturers - BT-MTA MTB Morse Taper Drill Shank – MeiWha
There are three types of Meihua CNC BT tool holder: BT30 tool holder, BT40 tool holder, BT50 tool holder. The material: using titanium alloy 20CrMnTi, wear-resistant and durable. The hardness of the handle is 58-60 degrees, the accuracy is 0.002mm to 0.005mm, the clamping is tight, and the stability is high. Features: Good rigidity, high hardness, carbonitriding treatment, wear resistance and durability. High precision, good dynamic balance performance and strong stability. The BT tool holder... -
China Wholesale Spiral Flute Tap Factories - Spiral Point Tap – MeiWha
The degree is better and can withstand greater cutting force. The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the apex taps should be preferentially used for through-hole threads. Spiral point tap, also known as “gun taps” because they “shoot” chips forward (clever, huh?), are very effective at clearing chips ahead of the cutting edge of the tap and pushing them out the other end of the hole. This is especially effect... -
China Wholesale 10mm Alloy Drill Bit Suppliers - HSS Drill – MeiWha
Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo... -
China Wholesale Flat Milling Factory - Ball End Milling HSS ROUGHING END MILLS 6MM – 20MM – MeiWha
They are available in a wide variety of diameter sizes from 1mm to 20mm. Meihua milling cutter 55 degrees: MW7050 series, coating color: fuchsia, Balzers coating, Jinlu GU25UF Bar stock, mold steel, stainless steel, general series of materials below 55 degrees, SKD11 corresponds to Chinese grades: Cr12MoV, 718 (41~47HRC hardness), NAK80 (HRC37~43), S316, Cr12MoV, C45, P20, ordinary mold steel, gray Cast iron, etc. Meihua milling cutter 65 degrees: MW7060 high hardness series, coating color: b... -
China Wholesale Tialn Coated Solid Carbide Drills Factory - Alloy Drill – MeiWha
Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. These bits require rigid toolholding to prevent breakage and should not be u... -
China Wholesale High Speed 8000rpm Complex Chamfering Machine Factory - Tapping Sharpener – MeiWha
This machine can be used for grinding all kinds of high speed steel and carbide engraving tools with shape like semicircle or reverse taper angel and single side or variable cutting tools.Grinding indexing head can be operated in 24 positions for grinding at any angle and shape.it can be used for grinding end mills,engravers,drills,lathe cutters and ball cutters without any complicated steps by simply replacing the indexing head accessories. -
China Wholesale 1604 R8 Inserts Suppliers - For Stainless Steel & Titanium Alloy – MeiWha
As a full-line supplier of metalworking tools, MeiWha provides a full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts are used for axial and face turning and feature three 80° corner cutting edges on each side of the insert. They replace the rhombic inserts that had only two cutting edges, thus saving production time and cost while maximizing insert life. MeiWha offers a variety of unique chipform... -
China Wholesale Tialn Coated Solid Carbide Drills Factory - Alloy Drill – MeiWha
Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. These bits require rigid toolholding to prevent breakage and should not be u... -
China Wholesale End Mill Sharpener Manufacturers - Ball Nose Milling HSS Round Nose Milling 6mm – 20mm – MeiWha
They can be single end or double end and they can be made from solid carbide or various compositions of high speed steel. They can be general purpose or high perfomance geometries. They can be used used for milling a large corner radius, grooving with a full radius, and contour or profile milling. The smaller diameters can be used for engraving. They are available in a wide variety of standard sizes and lengths. Carbide ball end mills are used for cutting curves and 3D shapes into metals,...
