Featured
-
China Wholesale Extra Long Drills Factory - Alloy Drill – MeiWha
Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. These bits require rigid toolholding to prevent breakage and should not be u... -
China Wholesale HSS Tap at best price in China Manufacturers - Spiral Flute Tap – MeiWha
Following are recommendations for the degree of spiral for various materials: Spiral flute taps are more suitable for processing non-through hole threads (also called blind holes), and the chips are upward during processing discharge. Due to the helix angle, the actual cutting rake angle of the tap will increase as the helix angle increases. • High spiral flutes 45° and higher – effective for very ductile materials like aluminum and copper. If used in other materials, they will usually cause... -
China Wholesale Flat Milling Factories - Flat End Milling HSS Flat End Mills 6mm – 20mm – MeiWha
Center cutting end mills can be used for plunging operations (axial milling), and can also be used in side milling operations (radial milling). Non-center cutting end mills may only be used in side milling applications. The most common material used for end mills is tungsten carbide, but HSS (high speed steel) and Cobalt (high speed steel with cobalt as an alloy) are also available. Flat end mills are used for roughing operations, cutting 2D shapes like engravings and circuit boards, and fla... -
China Wholesale Angel Head at best price in China Suppliers - Tapping Machine – MeiWha
Meiwha Electric Tapping Machine, adopt the best advanced electric servo intelligent system. Used for steel, aluminum, wood plastic and other tapping. imported motor ,cast iron body, double cantilever ,double pneumatic spring, table support, automatic return, cast iron body is not easy to deformation intelligent servo system, man-machine interface, powerful function, manual, automatic, vibration tapping mode to meet a variety of processing needs, with torque overload protection chuck, protect... -
China Wholesale HSS Industrial Drill Bits For Sale Manufacturers - HSS Drill – MeiWha
Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo... -
China Wholesale High Power Hydraulic Vise Factory - Complex Chamfer – MeiWha
Chamfering is a difficult task in small areas. A complex chamfer is one of the most useful and high efficiency producing machine. One can use a complex chamfering machine for smoothening of edges at a precise angle. This type of chamfering machine can be opted for materials like marble, glass, and other similar materials. Also, this is user-friendly and provides grip to the user for handling the machinery. There are major benefits that can be obtained from using the Chamfering machine is th... -
China Wholesale Drilling And Tapping Machine Factories - Straight Flute Tap – MeiWha
Straight Flute Taps are used to cut threads in blind or through holes in most materials. They are manufactured to ISO529 standard and are suitable for hand or machine cutting. This versatile set contains three taps: - Taper Cut (First tap) – Used for through holes or as a starter tap. - Second Tap (Plug) – To follow the taper when tapping blind holes. - Bottom Tap (Bottom) – For threading to the bottom of a blind hole. All taps should be used with the corresponding drill siz... -
China Wholesale Contact Now Factories - High Power Hydraulic Vise – MeiWha
High pressure MeiWha vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centres (vertical and horizontal). – Accuracy of 0.01 mm in clamping repeatability. – Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness. – Ideal for working in horizontal and vertical machining centres. – Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm. – Possible working positions:... -
China Wholesale Flat End Milling Manufacturers - Ball End Milling HSS ROUGHING END MILLS 6MM – 20MM – MeiWha
They are available in a wide variety of diameter sizes from 1mm to 20mm. Meihua milling cutter 55 degrees: MW7050 series, coating color: fuchsia, Balzers coating, Jinlu GU25UF Bar stock, mold steel, stainless steel, general series of materials below 55 degrees, SKD11 corresponds to Chinese grades: Cr12MoV, 718 (41~47HRC hardness), NAK80 (HRC37~43), S316, Cr12MoV, C45, P20, ordinary mold steel, gray Cast iron, etc. Meihua milling cutter 65 degrees: MW7060 high hardness series, coating color: b... -
China Wholesale HSK A-Mat Morse Taper Holder Suppliers - Angle Holder – MeiWha
Application: 1. It is used when it is difficult to fix large workpieces; when precision workpieces are fixed at one time and multiple surfaces need to be processed; when processing at any angle relative to the reference surface. 2. The processing is maintained at a special angle for profiling milling, such as ball end milling; the hole is in the hole, and other tools cannot penetrate the hole to process the small hole. 3. Oblique holes and grooves that cannot be processed by the machining c... -
China Wholesale HSS Milling Cutter Shank Factories - Ball Nose Milling HSS Round Nose Milling 6mm – 20mm – MeiWha
They can be single end or double end and they can be made from solid carbide or various compositions of high speed steel. They can be general purpose or high perfomance geometries. They can be used used for milling a large corner radius, grooving with a full radius, and contour or profile milling. The smaller diameters can be used for engraving. They are available in a wide variety of standard sizes and lengths. Carbide ball end mills are used for cutting curves and 3D shapes into metals,... -
China Wholesale Bt-MTB Morse Taper Shank Factories - Spiral Flute Tap – MeiWha
Following are recommendations for the degree of spiral for various materials: Spiral flute taps are more suitable for processing non-through hole threads (also called blind holes), and the chips are upward during processing discharge. Due to the helix angle, the actual cutting rake angle of the tap will increase as the helix angle increases. • High spiral flutes 45° and higher – effective for very ductile materials like aluminum and copper. If used in other materials, they will usually cause...
