Featured
-
China Wholesale Bt-FMB Face Mill Holder Manufacturers - BT-ER Holder – MeiWha
There are three types of Meihua CNC BT tool holder: BT30 tool holder, BT40 tool holder, BT50 tool holder. The material: using titanium alloy 20CrMnTi, wear-resistant and durable. The hardness of the handle is 58-60 degrees, the accuracy is 0.002mm to 0.005mm, the clamping is tight, and the stability is high. Features: Good rigidity, high hardness, carbonitriding treatment, wear resistance and durability. High precision, good dynamic balance performance and strong stability. The BT tool holder... -
China Wholesale HSS Drill Bit Manufacturers - HSS Drill – MeiWha
Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo... -
China Wholesale Tap Sharpener Machine Manufacturers - Spiral Point Tap – MeiWha
The degree is better and can withstand greater cutting force. The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the apex taps should be preferentially used for through-hole threads. Spiral point tap, also known as “gun taps” because they “shoot” chips forward (clever, huh?), are very effective at clearing chips ahead of the cutting edge of the tap and pushing them out the other end of the hole. This is especially effect... -
China Wholesale BE-ER Holders Factories - BT-MTA MTB Morse Taper Drill Shank – MeiWha
There are three types of Meihua CNC BT tool holder: BT30 tool holder, BT40 tool holder, BT50 tool holder. The material: using titanium alloy 20CrMnTi, wear-resistant and durable. The hardness of the handle is 58-60 degrees, the accuracy is 0.002mm to 0.005mm, the clamping is tight, and the stability is high. Features: Good rigidity, high hardness, carbonitriding treatment, wear resistance and durability. High precision, good dynamic balance performance and strong stability. The BT tool holder... -
China Wholesale 10mm Alloy Drill Bit Suppliers - Alloy Drill – MeiWha
Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. These bits require rigid toolholding to prevent breakage and should not be u... -
China Wholesale Straight Flute Tap Factories - Straight Flute Tap – MeiWha
Straight Flute Taps are used to cut threads in blind or through holes in most materials. They are manufactured to ISO529 standard and are suitable for hand or machine cutting. This versatile set contains three taps: - Taper Cut (First tap) – Used for through holes or as a starter tap. - Second Tap (Plug) – To follow the taper when tapping blind holes. - Bottom Tap (Bottom) – For threading to the bottom of a blind hole. All taps should be used with the corresponding drill siz... -
China Wholesale Drill Grinder Manufacturers - Alloy Drill – MeiWha
Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. These bits require rigid toolholding to prevent breakage and should not be u... -
China Wholesale CNC Machine Tool holder Bt Shank Factories - BT-SLA Side Lock End Mill Holder – MeiWha
BT-SLA Side Lock Holder is side-locking holder for holding shank of milling cutter, can be used for general milling, with screw holes on the side of the holder to clamp the milling cutter. Features : – For straight shank end mill. – End mill is held by two set screws. – End mill holder comes equipped with set screws. BT-SLA/SLN end mill holder with high precision BT30-SLA25 side lock end mill holder for lathe machine BT tooling is symmetrical about the spindle axis. This ... -
China Wholesale Complex Chamfer At Best Price Factory - Meiwha Vacuum Chuck MW-06A for CNC Process – MeiWha
Meiwha Vacuum Chuck,MW-06A Vacuum Vacuum with Vilmill from Meiwha is always the solution of choice when you want to machine numerous small components from a large-format workpiece. Instantly suck and fix a workpiece with air from a compressor, and used with processing machines such as a machining center or an abrasive machine. Since it is equipped with a vacuum ejector, no other vacuum pump is required. Easy start up just by connecting a tube of a one-touch valve to a compressor in your facto... -
China Wholesale Milling at best price in China Factories - End Milling for Aluminum HSS Milling Cutter for Aluminum 6mm – 20mm – MeiWha
Titanium aluminum nitride (AlTiN or TiAlN) coatings are slippery enough to help keep chips moving, especially if you aren’t using coolant. This coating is often used on carbide tooling. If you’re using high-speed steel (HSS) tooling, look for coatings like titanium carbo-nitride (TiCN). That way you get the lubricity needed for aluminum, but you can spend a little less cash than on carbide. Aluminum milling cutter: The main features of aluminum alloy spiral milling cutter are that it has an u... -
China Wholesale Round Nose Milling Factories - Ball Nose Milling HSS Round Nose Milling 6mm – 20mm – MeiWha
They can be single end or double end and they can be made from solid carbide or various compositions of high speed steel. They can be general purpose or high perfomance geometries. They can be used used for milling a large corner radius, grooving with a full radius, and contour or profile milling. The smaller diameters can be used for engraving. They are available in a wide variety of standard sizes and lengths. Carbide ball end mills are used for cutting curves and 3D shapes into metals,... -
China Wholesale ER32 Angel Head Manufacturers - Mill Sharpener – MeiWha
Meiwha Milling cutter grinding machine,simple and fast,blade clearly visible,convenient to the tool, grinding accuracy within 0.01mm,fully meet the new tool standard,can be processed according to different materials,adjust the sharpness of the grinding tip,improve the life and cutting efficiency. Product Parameters Type Grinding Range Grinding type Voltage No-Load Speed Grinding accuracy EG-12 3-12mm 2/3/4 flute end mill 220V/160W 4400rpm 0.01mm EG-20 4-20mm 2/3/4 flute end mil...
