Featured
-
China Wholesale 4 Flute Solid Carbide Roughing End Mills Suppliers - Flat End Milling HSS Flat End Mills 6mm – 20mm – MeiWha
Center cutting end mills can be used for plunging operations (axial milling), and can also be used in side milling operations (radial milling). Non-center cutting end mills may only be used in side milling applications. The most common material used for end mills is tungsten carbide, but HSS (high speed steel) and Cobalt (high speed steel with cobalt as an alloy) are also available. Flat end mills are used for roughing operations, cutting 2D shapes like engravings and circuit boards, and fla... -
China Wholesale Drill Grinder Suppliers - HSS Drill – MeiWha
Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo... -
China Wholesale Fast Feed Inserts Factories - For Stainless Steel & Titanium Alloy – MeiWha
As a full-line supplier of metalworking tools, MeiWha provides a full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts are used for axial and face turning and feature three 80° corner cutting edges on each side of the insert. They replace the rhombic inserts that had only two cutting edges, thus saving production time and cost while maximizing insert life. MeiWha offers a variety of unique chipform... -
China Wholesale Round Nose Milling Factories - Flat End Milling HSS Flat End Mills 6mm – 20mm – MeiWha
Center cutting end mills can be used for plunging operations (axial milling), and can also be used in side milling operations (radial milling). Non-center cutting end mills may only be used in side milling applications. The most common material used for end mills is tungsten carbide, but HSS (high speed steel) and Cobalt (high speed steel with cobalt as an alloy) are also available. Flat end mills are used for roughing operations, cutting 2D shapes like engravings and circuit boards, and fla... -
China Wholesale M10 Spiral Flute Threading Tap Suppliers - Spiral Point Tap – MeiWha
The degree is better and can withstand greater cutting force. The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the apex taps should be preferentially used for through-hole threads. Spiral point tap, also known as “gun taps” because they “shoot” chips forward (clever, huh?), are very effective at clearing chips ahead of the cutting edge of the tap and pushing them out the other end of the hole. This is especially effect... -
China Wholesale Drill at best price in China Manufacturers - HSS Drill – MeiWha
Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo... -
China Wholesale HSS Taps at best price in China Suppliers - Straight Flute Tap – MeiWha
Straight Flute Taps are used to cut threads in blind or through holes in most materials. They are manufactured to ISO529 standard and are suitable for hand or machine cutting. This versatile set contains three taps: - Taper Cut (First tap) – Used for through holes or as a starter tap. - Second Tap (Plug) – To follow the taper when tapping blind holes. - Bottom Tap (Bottom) – For threading to the bottom of a blind hole. All taps should be used with the corresponding drill siz... -
China Wholesale HSS Straight Flute Hand Taps Suppliers - Spiral Point Tap – MeiWha
The degree is better and can withstand greater cutting force. The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the apex taps should be preferentially used for through-hole threads. Spiral point tap, also known as “gun taps” because they “shoot” chips forward (clever, huh?), are very effective at clearing chips ahead of the cutting edge of the tap and pushing them out the other end of the hole. This is especially effect... -
China Wholesale Mill Sharpener Manufacturers - Ball Nose Milling HSS Round Nose Milling 6mm – 20mm – MeiWha
They can be single end or double end and they can be made from solid carbide or various compositions of high speed steel. They can be general purpose or high perfomance geometries. They can be used used for milling a large corner radius, grooving with a full radius, and contour or profile milling. The smaller diameters can be used for engraving. They are available in a wide variety of standard sizes and lengths. Carbide ball end mills are used for cutting curves and 3D shapes into metals,... -
China Wholesale Tin Coated HSS Straight Shank Twisted Drill Bits Manufacturers - Alloy Drill – MeiWha
Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. These bits require rigid toolholding to prevent breakage and should not be u... -
China Wholesale Bt-C Powerful Holder Suppliers - HSK(A)-GC High-speed powerful Holder – MeiWha
There are three types of Meihua CNC BT tool holder: BT30 tool holder, BT40 tool holder, BT50 tool holder. The material: using titanium alloy 20CrMnTi, wear-resistant and durable. The hardness of the handle is 58-60 degrees, the accuracy is 0.002mm to 0.005mm, the clamping is tight, and the stability is high. Features: Good rigidity, high hardness, carbonitriding treatment, wear resistance and durability. High precision, good dynamic balance performance and strong stability. The BT tool holder... -
China Wholesale CNC Machine Tool holder at best price in China Factories – BT-SLA Side Lock End Mill Holder – MeiWha
BT-SLA Side Lock Holder is side-locking holder for holding shank of milling cutter, can be used for general milling, with screw holes on the side of the holder to clamp the milling cutter. Features : – For straight shank end mill. – End mill is held by two set screws. – End mill holder comes equipped with set screws. BT-SLA/SLN end mill holder with high precision BT30-SLA25 side lock end mill holder for lathe machine BT tooling is symmetrical about the spindle axis. This ...
