Featured
-
China Wholesale 80° Rhombic With Hole Manufacturers - Portable EDM machine – MeiWha
Features: 1.Protable EDM machine can fast remove broken taps, drill, drift, etc., without damaging to the work piece. What applies a magnetic base and a cross stand to support the head, it can be placed at any position, adjust the processing direction comprehensively. It can be applied on any size of work-pieces, especially effective for large machine tools. 2.The short hole processing speed is about 1mm/min. 3.The work head with vibration function. -
China Wholesale Drill Sharpening Machine Factories - HSS Drill – MeiWha
Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo... -
China Wholesale Bt-SDC Back Pull Handle Manufacturers - Meiwha Vacuum Chuck MW-06L for CNC Process – MeiWha
Meiwha Vacuum Chuck,MW-06L The latest of Patent products for Meiwha Vacuum Chuck,can suck all kinds of material with blind holes and through holes. Vacuum Vacuum with Vilmill is always the solution of choice when you want to machine numerous small components from a large-format workpiece. Instantly suck and fix a workpiece with air from a compressor, and used with processing machines such as a machining center or an abrasive machine. Since it is equipped with a vacuum ejector, no other vacuum... -
China Wholesale Straight Flute Hand Taps Manufacturers - Spiral Point Tap – MeiWha
The degree is better and can withstand greater cutting force. The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the apex taps should be preferentially used for through-hole threads. Spiral point tap, also known as “gun taps” because they “shoot” chips forward (clever, huh?), are very effective at clearing chips ahead of the cutting edge of the tap and pushing them out the other end of the hole. This is especially effect... -
China Wholesale BT-ER Holder Manufacturers - BT-MTA MTB Morse Taper Drill Shank – MeiWha
There are three types of Meihua CNC BT tool holder: BT30 tool holder, BT40 tool holder, BT50 tool holder. The material: using titanium alloy 20CrMnTi, wear-resistant and durable. The hardness of the handle is 58-60 degrees, the accuracy is 0.002mm to 0.005mm, the clamping is tight, and the stability is high. Features: Good rigidity, high hardness, carbonitriding treatment, wear resistance and durability. High precision, good dynamic balance performance and strong stability. The BT tool holder... -
China Wholesale Tin Coated HSS Straight Shank Twisted Drill Bits Factories - HSS Drill – MeiWha
Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo... -
China Wholesale Drill Grinder Manufacturers - HSS Drill – MeiWha
Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo... -
China Wholesale ER16 Angel Head Factories - Meiwha Vacuum Chuck MW-06A for CNC Process – MeiWha
Meiwha Vacuum Chuck,MW-06A Vacuum Vacuum with Vilmill from Meiwha is always the solution of choice when you want to machine numerous small components from a large-format workpiece. Instantly suck and fix a workpiece with air from a compressor, and used with processing machines such as a machining center or an abrasive machine. Since it is equipped with a vacuum ejector, no other vacuum pump is required. Easy start up just by connecting a tube of a one-touch valve to a compressor in your facto... -
China Wholesale Spiral Flute Tap Manufacturers - Spiral Point Tap – MeiWha
The degree is better and can withstand greater cutting force. The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the apex taps should be preferentially used for through-hole threads. Spiral point tap, also known as “gun taps” because they “shoot” chips forward (clever, huh?), are very effective at clearing chips ahead of the cutting edge of the tap and pushing them out the other end of the hole. This is especially effect... -
China Wholesale Hot sell in China for HSS Taps Suppliers - Spiral Flute Tap – MeiWha
Following are recommendations for the degree of spiral for various materials: Spiral flute taps are more suitable for processing non-through hole threads (also called blind holes), and the chips are upward during processing discharge. Due to the helix angle, the actual cutting rake angle of the tap will increase as the helix angle increases. • High spiral flutes 45° and higher – effective for very ductile materials like aluminum and copper. If used in other materials, they will usually cause... -
China Wholesale Tool Holders Manufacturers - BT-SK High Speed Holder – MeiWha
There are three types of Meihua CNC BT tool holder: BT30 tool holder, BT40 tool holder, BT50 tool holder. The material: using titanium alloy 20CrMnTi, wear-resistant and durable. The hardness of the handle is 58-60 degrees, the accuracy is 0.002mm to 0.005mm, the clamping is tight, and the stability is high. Features: Good rigidity, high hardness, carbonitriding treatment, wear resistance and durability. High precision, good dynamic balance performance and strong stability. The BT tool holder... -
China Wholesale Ball Nose End Mill Factory - End Milling for Aluminum HSS Milling Cutter for Aluminum 6mm – 20mm – MeiWha
Titanium aluminum nitride (AlTiN or TiAlN) coatings are slippery enough to help keep chips moving, especially if you aren’t using coolant. This coating is often used on carbide tooling. If you’re using high-speed steel (HSS) tooling, look for coatings like titanium carbo-nitride (TiCN). That way you get the lubricity needed for aluminum, but you can spend a little less cash than on carbide. Aluminum milling cutter: The main features of aluminum alloy spiral milling cutter are that it has an u...
