Featured
-
China Wholesale Drill Sharpening Machine Suppliers - Alloy Drill – MeiWha
Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. These bits require rigid toolholding to prevent breakage and should not be u... -
China Wholesale Tool Holder CNC Factories - BT-ER Holder – MeiWha
There are three types of Meihua CNC BT tool holder: BT30 tool holder, BT40 tool holder, BT50 tool holder. The material: using titanium alloy 20CrMnTi, wear-resistant and durable. The hardness of the handle is 58-60 degrees, the accuracy is 0.002mm to 0.005mm, the clamping is tight, and the stability is high. Features: Good rigidity, high hardness, carbonitriding treatment, wear resistance and durability. High precision, good dynamic balance performance and strong stability. The BT tool holder... -
China Wholesale Hss Roughing End Mills 6mm – 20mm Factories - Ball Nose Milling HSS Round Nose Milling 6mm – 20mm – MeiWha
They can be single end or double end and they can be made from solid carbide or various compositions of high speed steel. They can be general purpose or high perfomance geometries. They can be used used for milling a large corner radius, grooving with a full radius, and contour or profile milling. The smaller diameters can be used for engraving. They are available in a wide variety of standard sizes and lengths. Carbide ball end mills are used for cutting curves and 3D shapes into metals,... -
China Wholesale 1mm Ball End Mill Factory - Ball Nose Milling HSS Round Nose Milling 6mm – 20mm – MeiWha
They can be single end or double end and they can be made from solid carbide or various compositions of high speed steel. They can be general purpose or high perfomance geometries. They can be used used for milling a large corner radius, grooving with a full radius, and contour or profile milling. The smaller diameters can be used for engraving. They are available in a wide variety of standard sizes and lengths. Carbide ball end mills are used for cutting curves and 3D shapes into metals,... -
China Wholesale Taps Factory - Straight Flute Tap – MeiWha
Straight Flute Taps are used to cut threads in blind or through holes in most materials. They are manufactured to ISO529 standard and are suitable for hand or machine cutting. This versatile set contains three taps: - Taper Cut (First tap) – Used for through holes or as a starter tap. - Second Tap (Plug) – To follow the taper when tapping blind holes. - Bottom Tap (Bottom) – For threading to the bottom of a blind hole. All taps should be used with the corresponding drill siz... -
China Wholesale Flat Bottom R Angle Milling Inserts Factories - For Stainless Steel & Titanium Alloy – MeiWha
As a full-line supplier of metalworking tools, MeiWha provides a full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts are used for axial and face turning and feature three 80° corner cutting edges on each side of the insert. They replace the rhombic inserts that had only two cutting edges, thus saving production time and cost while maximizing insert life. MeiWha offers a variety of unique chipform... -
China Wholesale End Milling For Aluminum Manufacturers - Ball End Milling HSS ROUGHING END MILLS 6MM – 20MM – MeiWha
They are available in a wide variety of diameter sizes from 1mm to 20mm. Meihua milling cutter 55 degrees: MW7050 series, coating color: fuchsia, Balzers coating, Jinlu GU25UF Bar stock, mold steel, stainless steel, general series of materials below 55 degrees, SKD11 corresponds to Chinese grades: Cr12MoV, 718 (41~47HRC hardness), NAK80 (HRC37~43), S316, Cr12MoV, C45, P20, ordinary mold steel, gray Cast iron, etc. Meihua milling cutter 65 degrees: MW7060 high hardness series, coating color: b... -
China Wholesale HSS Twist Drill Suppliers - Alloy Drill – MeiWha
Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. These bits require rigid toolholding to prevent breakage and should not be u... -
China Wholesale Fast Feed Inserts Factories - For Stainless Steel & Titanium Alloy – MeiWha
As a full-line supplier of metalworking tools, MeiWha provides a full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts are used for axial and face turning and feature three 80° corner cutting edges on each side of the insert. They replace the rhombic inserts that had only two cutting edges, thus saving production time and cost while maximizing insert life. MeiWha offers a variety of unique chipform... -
China Wholesale For Steel & Iron Casting Factory - Complex Chamfer – MeiWha
Chamfering is a difficult task in small areas. A complex chamfer is one of the most useful and high efficiency producing machine. One can use a complex chamfering machine for smoothening of edges at a precise angle. This type of chamfering machine can be opted for materials like marble, glass, and other similar materials. Also, this is user-friendly and provides grip to the user for handling the machinery. There are major benefits that can be obtained from using the Chamfering machine is th... -
China Wholesale Round Roughing Milling Inserts Factories - For Steel & Iron Casting – MeiWha
Video As a full-line supplier of metalworking tools, MeiWha provides a full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts are used for axial and face turning and feature three 80° corner cutting edges on each side of the insert. They replace the rhombic inserts that had only two cutting edges, thus saving production time and cost while maximizing insert life. MeiWha offers a variety of unique ch... -
China Wholesale Electric End Mill Sharpener Suppliers - Flat End Milling HSS Flat End Mills 6mm – 20mm – MeiWha
Center cutting end mills can be used for plunging operations (axial milling), and can also be used in side milling operations (radial milling). Non-center cutting end mills may only be used in side milling applications. The most common material used for end mills is tungsten carbide, but HSS (high speed steel) and Cobalt (high speed steel with cobalt as an alloy) are also available. Flat end mills are used for roughing operations, cutting 2D shapes like engravings and circuit boards, and fla...
