Featured
-
China Wholesale HSS Industrial Drill Bits For Sale Factories - Alloy Drill – MeiWha
Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. These bits require rigid toolholding to prevent breakage and should not be u... -
China Wholesale Servo Tapping Machine Manufacturers - Spiral Point Tap – MeiWha
The degree is better and can withstand greater cutting force. The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the apex taps should be preferentially used for through-hole threads. Spiral point tap, also known as “gun taps” because they “shoot” chips forward (clever, huh?), are very effective at clearing chips ahead of the cutting edge of the tap and pushing them out the other end of the hole. This is especially effect... -
China Wholesale Complex Chamfer At Best Price Factory - Tapping Sharpener – MeiWha
This machine can be used for grinding all kinds of high speed steel and carbide engraving tools with shape like semicircle or reverse taper angel and single side or variable cutting tools.Grinding indexing head can be operated in 24 positions for grinding at any angle and shape.it can be used for grinding end mills,engravers,drills,lathe cutters and ball cutters without any complicated steps by simply replacing the indexing head accessories. -
China Wholesale ER32 Angel Head Suppliers - Portable EDM machine – MeiWha
Features: 1.Protable EDM machine can fast remove broken taps, drill, drift, etc., without damaging to the work piece. What applies a magnetic base and a cross stand to support the head, it can be placed at any position, adjust the processing direction comprehensively. It can be applied on any size of work-pieces, especially effective for large machine tools. 2.The short hole processing speed is about 1mm/min. 3.The work head with vibration function. -
China Wholesale 10mm Alloy Drill Bit Factory - HSS Drill – MeiWha
Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo... -
China Wholesale Bt-HM Hydraulic Holder Suppliers - BT-APU Integrated Drill Chuck – MeiWha
There are three types of Meihua CNC BT tool holder: BT30 tool holder, BT40 tool holder, BT50 tool holder. The material: using titanium alloy 20CrMnTi, wear-resistant and durable. The hardness of the handle is 58-60 degrees, the accuracy is 0.002mm to 0.005mm, the clamping is tight, and the stability is high. Features: Good rigidity, high hardness, carbonitriding treatment, wear resistance and durability. High precision, good dynamic balance performance and strong stability. The BT tool holder... -
China Wholesale End Mill Grinder Suppliers - Ball End Milling HSS ROUGHING END MILLS 6MM – 20MM – MeiWha
They are available in a wide variety of diameter sizes from 1mm to 20mm. Meihua milling cutter 55 degrees: MW7050 series, coating color: fuchsia, Balzers coating, Jinlu GU25UF Bar stock, mold steel, stainless steel, general series of materials below 55 degrees, SKD11 corresponds to Chinese grades: Cr12MoV, 718 (41~47HRC hardness), NAK80 (HRC37~43), S316, Cr12MoV, C45, P20, ordinary mold steel, gray Cast iron, etc. Meihua milling cutter 65 degrees: MW7060 high hardness series, coating color: b... -
China Wholesale Ball Nose Milling Manufacturers - End Milling for Aluminum HSS Milling Cutter for Aluminum 6mm – 20mm – MeiWha
Titanium aluminum nitride (AlTiN or TiAlN) coatings are slippery enough to help keep chips moving, especially if you aren’t using coolant. This coating is often used on carbide tooling. If you’re using high-speed steel (HSS) tooling, look for coatings like titanium carbo-nitride (TiCN). That way you get the lubricity needed for aluminum, but you can spend a little less cash than on carbide. Aluminum milling cutter: The main features of aluminum alloy spiral milling cutter are that it has an u... -
China Wholesale HSS Tap at best price in China Suppliers - Spiral Flute Tap – MeiWha
Following are recommendations for the degree of spiral for various materials: Spiral flute taps are more suitable for processing non-through hole threads (also called blind holes), and the chips are upward during processing discharge. Due to the helix angle, the actual cutting rake angle of the tap will increase as the helix angle increases. • High spiral flutes 45° and higher – effective for very ductile materials like aluminum and copper. If used in other materials, they will usually cause... -
China Wholesale APMT1135 Inserts Factories - For Stainless Steel & Titanium Alloy – MeiWha
As a full-line supplier of metalworking tools, MeiWha provides a full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts are used for axial and face turning and feature three 80° corner cutting edges on each side of the insert. They replace the rhombic inserts that had only two cutting edges, thus saving production time and cost while maximizing insert life. MeiWha offers a variety of unique chipform... -
China Wholesale Bt-SDC Back Pull Handle Factories - Tapping Sharpener – MeiWha
This machine can be used for grinding all kinds of high speed steel and carbide engraving tools with shape like semicircle or reverse taper angel and single side or variable cutting tools.Grinding indexing head can be operated in 24 positions for grinding at any angle and shape.it can be used for grinding end mills,engravers,drills,lathe cutters and ball cutters without any complicated steps by simply replacing the indexing head accessories. -
China Wholesale Precision Machine Vice Factories - Tapping Sharpener – MeiWha
This machine can be used for grinding all kinds of high speed steel and carbide engraving tools with shape like semicircle or reverse taper angel and single side or variable cutting tools.Grinding indexing head can be operated in 24 positions for grinding at any angle and shape.it can be used for grinding end mills,engravers,drills,lathe cutters and ball cutters without any complicated steps by simply replacing the indexing head accessories.
