Featured
-
China Wholesale Bt-SDC Back Pull Handle Suppliers - Mill Sharpener – MeiWha
Meiwha Milling cutter grinding machine,simple and fast,blade clearly visible,convenient to the tool, grinding accuracy within 0.01mm,fully meet the new tool standard,can be processed according to different materials,adjust the sharpness of the grinding tip,improve the life and cutting efficiency. Product Parameters Type Grinding Range Grinding type Voltage No-Load Speed Grinding accuracy EG-12 3-12mm 2/3/4 flute end mill 220V/160W 4400rpm 0.01mm EG-20 4-20mm 2/3/4 flute end mil... -
China Wholesale HSS Straight Flute Hand Taps Factories - Straight Flute Tap – MeiWha
Straight Flute Taps are used to cut threads in blind or through holes in most materials. They are manufactured to ISO529 standard and are suitable for hand or machine cutting. This versatile set contains three taps: - Taper Cut (First tap) – Used for through holes or as a starter tap. - Second Tap (Plug) – To follow the taper when tapping blind holes. - Bottom Tap (Bottom) – For threading to the bottom of a blind hole. All taps should be used with the corresponding drill siz... -
China Wholesale Bt-HM Hydraulic Holder Suppliers - BT-APU Integrated Drill Chuck – MeiWha
There are three types of Meihua CNC BT tool holder: BT30 tool holder, BT40 tool holder, BT50 tool holder. The material: using titanium alloy 20CrMnTi, wear-resistant and durable. The hardness of the handle is 58-60 degrees, the accuracy is 0.002mm to 0.005mm, the clamping is tight, and the stability is high. Features: Good rigidity, high hardness, carbonitriding treatment, wear resistance and durability. High precision, good dynamic balance performance and strong stability. The BT tool holder... -
China Wholesale HSS Hand Thread Taps Factories - Spiral Point Tap – MeiWha
The degree is better and can withstand greater cutting force. The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the apex taps should be preferentially used for through-hole threads. Spiral point tap, also known as “gun taps” because they “shoot” chips forward (clever, huh?), are very effective at clearing chips ahead of the cutting edge of the tap and pushing them out the other end of the hole. This is especially effect... -
China Wholesale Mill Grinding Machine Suppliers - Ball End Milling HSS ROUGHING END MILLS 6MM – 20MM – MeiWha
They are available in a wide variety of diameter sizes from 1mm to 20mm. Meihua milling cutter 55 degrees: MW7050 series, coating color: fuchsia, Balzers coating, Jinlu GU25UF Bar stock, mold steel, stainless steel, general series of materials below 55 degrees, SKD11 corresponds to Chinese grades: Cr12MoV, 718 (41~47HRC hardness), NAK80 (HRC37~43), S316, Cr12MoV, C45, P20, ordinary mold steel, gray Cast iron, etc. Meihua milling cutter 65 degrees: MW7060 high hardness series, coating color: b... -
China Wholesale Angle Holder Factory - HSK(A)-GC High-speed powerful Holder – MeiWha
There are three types of Meihua CNC BT tool holder: BT30 tool holder, BT40 tool holder, BT50 tool holder. The material: using titanium alloy 20CrMnTi, wear-resistant and durable. The hardness of the handle is 58-60 degrees, the accuracy is 0.002mm to 0.005mm, the clamping is tight, and the stability is high. Features: Good rigidity, high hardness, carbonitriding treatment, wear resistance and durability. High precision, good dynamic balance performance and strong stability. The BT tool holder... -
China Wholesale Drill Factory - HSS Drill – MeiWha
Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo... -
China Wholesale Taps Factories - Spiral Flute Tap – MeiWha
Following are recommendations for the degree of spiral for various materials: Spiral flute taps are more suitable for processing non-through hole threads (also called blind holes), and the chips are upward during processing discharge. Due to the helix angle, the actual cutting rake angle of the tap will increase as the helix angle increases. • High spiral flutes 45° and higher – effective for very ductile materials like aluminum and copper. If used in other materials, they will usually cause... -
China Wholesale APMT1135 Inserts Manufacturers - For Aluminium & Copper – MeiWha
ISO standard tools perform most of the metalworking industry’s machining. The applications range from finishing to roughing. As a full-line supplier of metalworking tools, MeiWha provides a full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts are used for axial and face turning and feature three 80° corner cutting edges on each side of the insert. They replace the rhombic inserts that had on... -
China Wholesale Drill Grinder Manufacturers - Alloy Drill – MeiWha
Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. These bits require rigid toolholding to prevent breakage and should not be u... -
China Wholesale Mill Cutter Grinding Machine Manufacturers - Ball End Milling HSS ROUGHING END MILLS 6MM – 20MM – MeiWha
They are available in a wide variety of diameter sizes from 1mm to 20mm. Meihua milling cutter 55 degrees: MW7050 series, coating color: fuchsia, Balzers coating, Jinlu GU25UF Bar stock, mold steel, stainless steel, general series of materials below 55 degrees, SKD11 corresponds to Chinese grades: Cr12MoV, 718 (41~47HRC hardness), NAK80 (HRC37~43), S316, Cr12MoV, C45, P20, ordinary mold steel, gray Cast iron, etc. Meihua milling cutter 65 degrees: MW7060 high hardness series, coating color: b... -
China Wholesale RPMT1204 Inserts Factories – For Aluminium & Copper – MeiWha
ISO standard tools perform most of the metalworking industry’s machining. The applications range from finishing to roughing. As a full-line supplier of metalworking tools, MeiWha provides a full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts are used for axial and face turning and feature three 80° corner cutting edges on each side of the insert. They replace the rhombic inserts that had on...
