Meiwha Vacuum Chuck MW-06L for CNC Process

Short Description:

Vacuum chucking is one of those things that has to be seen to be believed. Put your piece on the drum chuck, turn on the vacuum and turn on your lathe. Your piece is held quickly and securely. Work is not marked and can be removed instantly when the vacuum is turned off.

With this set up you will be able to add a professional touch quickly and easily to almost all your work.

Send email to us

Product Detail

Product Tags

Meiwha Vacuum Chuck,MW-06L

The latest of Patent products for Meiwha Vacuum Chuck,can suck all kinds of material with blind holes and through holes.

Vacuum Vacuum with Vilmill is always the solution of choice when you want to machine numerous small components from a large-format workpiece.

Instantly suck and fix a workpiece with air from a compressor, and used with processing machines such as a machining center or an abrasive machine.

Since it is equipped with a vacuum ejector, no other vacuum pump is required.

Easy start up just by connecting a tube of a one-touch valve to a compressor in your factory.

Due to air sucking, suitably used for non-magnetic materials as stainless steel, aluminum or resin.

While the valve is off, a small amount of air flows out of 1mm dia. vacuum hole, which largely prevents any foreign materials from going into the hole.

Easy maintenance as most parts are easily accessible by opening the front panel.

Use solid clamps to fix the unit to a machine table.