Products News
-
CNC Tool Holder: Core Component of Precision Machining
1. Functions and Structural Design CNC tool holder is a key component connecting the spindle and cutting tool in CNC machine tools, and undertakes the three core functions of power transmission, tool positioning and vibration suppression. Its structure usually includes the following modules: Tape...Read more -
Angle Head Installation and Usage Recommendations
After receiving the angle head, please check whether the packaging and accessories are complete. 1. After correct installation, before cutting, you need to carefully verify the technical parameters such as torque, speed, power, etc. required for workpiece cutting. If th...Read more -
What is the shrinkage of the heat shrink tool holder? Influencing factors and adjustment methods
Shrink fit tool holder have been widely used in CNC machining centers due to their high precision, high clamping force and convenient operation. This article will explore the shrinkage of shrink fit tool holder in depth, analyze the factors affecting the shrinkage, and provide corresponding adjus...Read more -
Popularization of U Drill Usage
Compared with ordinary drills, the advantages of U drills are as follows: ▲U drills can drill holes on surfaces with an inclination angle of less than 30 without reducing cutting parameters. ▲After the cutting parameters of U drills are reduced by 30%, intermittent cutting can be achieved, such a...Read more -
Angle-fixed MC Flat Vise — Double the Clamping Force
The angle-fixed MC flat jaw vise adopts an angle-fixed design. When clamping the workpiece, the upper cover will not move upward and there is a 45-degree downward pressure, which makes the workpiece clamping more accurate. Features: 1). Unique structure, the workpiece can be clamped strongly, an...Read more -
New Design of Shrink Fit Machine
The tool holder heat shrink machine is a heating device for heat shrink tool holder loading and unloading tools. Using the principle of metal expansion and contraction, the heat shrink machine heats the tool holder to enlarge the hole for clamping the tool, and then puts the tool in. After the te...Read more -
Differences between spinning toolholders and hydraulic toolholders
1. Technical features and advantages of spinning toolholders The spinning toolholder adopts mechanical rotation and clamping method to generate radial pressure through the thread structure. Its clamping force can usually reach 12000-15000 Newtons, which is suitable for general processing needs. ...Read more -
Features and Applications of Lathe Tool Holders
High Efficiency The lathe driven tool holder has multi-axis, high-speed and high-efficiency performance. As long as it rotates along the bearing and transmission shaft, it can easily complete the processing of complex parts on the same machine tool with high speed and high precision. For example,...Read more -
MeiWha Tap Holder
A tap holder is a tool holder that has a tap attached for making internal threads and can be mounted on a machining center, milling machine, or upright drill press. Tap holder shanks include MT shanks for upright balls, NT shanks and straight shanks for general...Read more -
How to use vise better
Generally, if we place the vise directly on the workbench of the machine tool, it may be crooked, which requires us to adjust the position of the vise. First, slightly tighten the 2 bolts/pressure plates on the left and right, then install one of them. Then use the calibration meter to lean on ...Read more -
Selection and application of Angle Head
Angle heads are mainly used in machining centers, gantry boring and milling machines and vertical lathes. The light ones can be installed in the tool magazine and can automatically change tools between the tool magazine and the machine tool spindle; the medium and heavy ones have greater rigidity...Read more -
Commonly used types and applications of End Mills
A milling cutter is a rotating tool with one or more teeth used for milling. During operation, each cutter tooth intermittently cuts away the excess of the workpiece. End mills are mainly used for processing planes, steps, grooves, forming surfaces and cutting workpieces on milling machines. Acc...Read more
