Featured

  • China Wholesale PCD Insert Factories - CBN – MeiWha

    China Wholesale PCD Insert Factories - CBN – MeiWha

    As a full-line supplier of metalworking tools, MeiWha provides a full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts are used for axial and face turning and feature three 80° corner cutting edges on each side of the insert. They replace the rhombic inserts that had only two cutting edges, thus saving production time and cost while maximizing insert life. MeiWha offers a variety of unique chipform...
  • China Wholesale Round Nose Milling Manufacturers - Ball End Milling HSS ROUGHING END MILLS 6MM – 20MM – MeiWha

    China Wholesale Round Nose Milling Manufacturers - Ball End Milling HSS ROUGHING END MILLS 6MM – 20MM – MeiWha

    They are available in a wide variety of diameter sizes from 1mm to 20mm. Meihua milling cutter 55 degrees: MW7050 series, coating color: fuchsia, Balzers coating, Jinlu GU25UF Bar stock, mold steel, stainless steel, general series of materials below 55 degrees, SKD11 corresponds to Chinese grades: Cr12MoV, 718 (41~47HRC hardness), NAK80 (HRC37~43), S316, Cr12MoV, C45, P20, ordinary mold steel, gray Cast iron, etc. Meihua milling cutter 65 degrees: MW7060 high hardness series, coating color: b...
  • China Wholesale HSS Tap Factories - Straight Flute Tap – MeiWha

    China Wholesale HSS Tap Factories - Straight Flute Tap – MeiWha

    Straight Flute Taps are used to cut threads in blind or through holes in most materials. They are manufactured to ISO529 standard and are suitable for hand or machine cutting. This versatile set contains three taps: - Taper Cut (First tap) – Used for through holes or as a starter tap. - Second Tap (Plug) – To follow the taper when tapping blind holes. - Bottom Tap (Bottom) – For threading to the bottom of a blind hole. All taps should be used with the corresponding drill siz...
  • China Wholesale For Stainless Steel & Titanium Alloy Factories - Portable EDM machine – MeiWha

    China Wholesale For Stainless Steel & Titanium Alloy Factories - Portable EDM machine – MeiWha

    Features: 1.Protable EDM machine can fast remove broken taps, drill, drift, etc., without damaging to the work piece. What applies a magnetic base and a cross stand to support the head, it can be placed at any position, adjust the processing direction comprehensively. It can be applied on any size of work-pieces, especially effective for large machine tools. 2.The short hole processing speed is about 1mm/min. 3.The work head with vibration function.
  • China Wholesale Precision Cross Slide Vise Factory - Meiwha Vacuum Chuck MW-06A for CNC Process  – MeiWha

    China Wholesale Precision Cross Slide Vise Factory - Meiwha Vacuum Chuck MW-06A for CNC Process – MeiWha

    Meiwha Vacuum Chuck,MW-06A Vacuum Vacuum with Vilmill from Meiwha is always the solution of choice when you want to machine numerous small components from a large-format workpiece. Instantly suck and fix a workpiece with air from a compressor, and used with processing machines such as a machining center or an abrasive machine. Since it is equipped with a vacuum ejector, no other vacuum pump is required. Easy start up just by connecting a tube of a one-touch valve to a compressor in your facto...
  • China Wholesale Sharpener Mill End Factory - Flat End Milling HSS Flat End Mills 6mm – 20mm – MeiWha

    China Wholesale Sharpener Mill End Factory - Flat End Milling HSS Flat End Mills 6mm – 20mm – MeiWha

    Center cutting end mills can be used for plunging operations (axial milling), and can also be used in side milling operations (radial milling).  Non-center cutting end mills may only be used in side milling applications. The most common material used for end mills is tungsten carbide, but HSS (high speed steel) and Cobalt (high speed steel with cobalt as an alloy) are also available. Flat end mills are used for roughing operations, cutting 2D shapes like engravings and circuit boards, and fla...
  • China Wholesale Milling at best price in China Suppliers - Ball Nose Milling HSS Round Nose Milling 6mm – 20mm – MeiWha

    China Wholesale Milling at best price in China Suppliers - Ball Nose Milling HSS Round Nose Milling 6mm – 20mm – MeiWha

    They can be single end or double end and they can be made from solid carbide or various compositions of high speed steel.  They can be general purpose or high perfomance geometries.  They can be used used for milling a large corner radius, grooving with a full radius, and contour or profile milling.  The smaller diameters can be used for engraving.  They are available in a wide variety of standard sizes and lengths. Carbide ball end mills are used for cutting curves and 3D shapes into metals,...
  • China Wholesale Drill Bits Suppliers - HSS Drill – MeiWha

    China Wholesale Drill Bits Suppliers - HSS Drill – MeiWha

    Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo...
  • China Wholesale Drill Grinder Factories - HSS Drill – MeiWha

    China Wholesale Drill Grinder Factories - HSS Drill – MeiWha

    Meiwha Drill Tools offer HSS Drill and Alloy Drill.The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lo...
  • China Wholesale 80° Hexagon With Hole Factory - Grinding Wheel Chamfer – MeiWha

    China Wholesale 80° Hexagon With Hole Factory - Grinding Wheel Chamfer – MeiWha

    This type of chamfering machine can be opted for materials like marble, glass, and other similar materials. Also, this is user-friendly and provides grip to the user for handling the machinery. There are major benefits that can be obtained from using the Chamfering machine is that labouring is not required when one can use the Chamfering machine instead of hard work. The cycle of the chamfering machine works rapidly so that the procedure of cutting down the edges of large material/metals like...
  • China Wholesale Drill Manufacturers - Alloy Drill – MeiWha

    China Wholesale Drill Manufacturers - Alloy Drill – MeiWha

    Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. These bits require rigid toolholding to prevent breakage and should not be u...
  • China Wholesale Automatic CNC Chamfer Grinding Machine Factory - Tapping Sharpener – MeiWha

    China Wholesale Automatic CNC Chamfer Grinding Machine Factory - Tapping Sharpener – MeiWha

    This machine can be used for grinding all kinds of high speed steel and carbide engraving tools with shape like semicircle or reverse taper angel and single side or variable cutting tools.Grinding indexing head can be operated in 24 positions for grinding at any angle and shape.it can be used for grinding end mills,engravers,drills,lathe cutters and ball cutters without any complicated steps by simply replacing the indexing head accessories.
123456 Next > >> Page 1 / 234